The Dishwasher Pack

This is all you need for a good dishwasher setup

SAR 2,843.35


SAR 2,993.00

SAR 2,942.10


SAR 3,269.00

SAR 22,763.80

-SAR 4,557.20

SAR 27,321.00

Pack content

  •  Self-supporting structure in stainless steel fine satin finish
  • Possibility of corner installation or online and integrated with tables and sinks
  •  Completely rounded double wall tank
  • Electronic control with 4 selectable cycles (except CAP 7 E with electronic timer at 3 times of washing
  • All programming operations are executed through the external keyboard and display

Door-type dishwasher CAP 12 DE made by HOONVED is special for professional and qualitative washing dishware. This model easy washes not only dishware and tableware, but also different utencils. Taking into account short duration of washing cycle, rather high productivity gives availability of cleandishware.

In this model CAP 12 DE isfront load type. According to manufacturer’s instruction dimensions of this door-type washer CAP 12 DE are: length – 625 mm, depth – 740 mm, height – 1460 mm. Optimal baskets size – 500х500 mm. For the washing in this model dishwashing machine maximum plates diameter is 420 mm. At that, maximum container height must be 420 mm.

Average wash temperature in this door-type dishwasher is about 55 °C. Therewith, rinsing temperature is 85 °C. For steady operation of the equipment required water pressure must be not less 2 bar. This model of door-type dishwasher satisfies all standards. In represented model case material is stainless steel. This door-type washer CAP 12 DE, not only properly performed and durable, but also is very handy. Using this dishwasher will be - a good choice for different kinds of dinning halls and buffets and so on. 
  • Stainless Steel 304 Single Compartment Sink.
  • NSF Certified.
  • Built of heavy gauge 16(1.5mm) stainless steel.
  • Dimension: Width 700mm, Height 900mm.
  • Bowl Dim: Length 500mm, Width 500mm, Height 300mm.
  • Manufactured upon request (3-5 business days).
  • For customized sink please contact our customer service. 

NSF certified.

why our compartment sink?

Our sinks are built of heavy gauge 16(1.5mm) stainless steel, fully welded joints with radius on all corners and polished as one-piece material. Legs are equipped with gussets and adjustable bullet feet for easy leveling. Placement of direct leg supports ensures stability of the column load requirement for the entire sink unit. Faucet is included. 


  • Stainless Steel 304 Exhaust Hood.
  • NSF certified.
  • Exposed parts are manufactured from 20 GA (1.0mm) stainless steel. 
  • Manufactured upon request (3-5 business days).
  • Dimension: Height 500mm.
  • For customized Manufactured Hood please contact our customer service.
  • Price doesn't include the installation. For more details please contact customer service.

NSF certified.


Exhaust hoods are highly efficient kitchen ventilation that remove contaminated air and excess heat emitted by cooking equipment, helping to provide a comfortable and clean environment.

  • Hoods are designed and manufactured to prevent the harborage of vermin and the accumulation of dirt and debris, permit inspection, maintenance, servicing and cleaning of components.
  • Stainless Steel baffle filters are easily removable for cleaning.
  • Double side panels for more supporting and strengthen the whole body.
  • Additional mounted channels (2.0 mm) for easy site installation and to reinforce the body.
  • And for recessed lighting fixtures are NSF approved and listed. Glass components conform to the requirements of material components, Fixtures allow for easy replacement of Led light that conforms to the original requirements of the fixture.
  • Fully sealed unit, to avoid any grease leakage designed for draining grease from hood through drain fittings to S.S grease cup and the grease oil cups fitted into channel for easily removable and cleanable.
  • Additional Stainless-Steel Neck (adapter) to be fixed properly with the duct.
  • Stainless steel Knocked down design.
  • Exposed parts are manufactured from 20 GA (1.0mm) stainless steel.
  • Fresh air option is available to increase the efficiency of the exhausting and circulation of air.
  • Flexible hose with spring
  • Furnished with 1/2" (13mm) NPS male inlets on 4" (102mm) centers with 1/4" (6mm) NPT union tailpieces
  • Built-in check valves
  • Low lead compliant
  •  Its 5 spacing configuration holds up to ten 10" bowls, deep plates, platters, or plate covers while its 9 spacing configuration holds up to eighteen 10" plates, twelve 12" plates, twenty seven 7 1/2" plates, or nine 14" x 18" trays
  • Each 5 x 9 Camrack peg rack is made of long-lasting polypropylene